Antennes / Verlooppluggen, pluggen & SWR meters
filter_list Filters

Verloopluggen, pluggen, Analyzers en SWR meters





Bezig met laden...
(0)
  • check_circleVerloopplug
  • check_circleSMA to BNC
Antenne adapter SMA naar BNC

€ 3, 75

(0)
  • check_circleVerloopplug
  • check_circleSMA to N-Female
Antenne adapter SMA naar N-Female

€ 5, 75

(0)
  • check_circleVerloopplug
  • check_circleSMA naar PL
Antenne adapter SMA naar PL

€ 5, 75

(0)
  • check_circleVerloopplug
  • check_circleSMA-F to BNC
Antenne adapter SMA-F naar BNC

€ 5, 75

(0)
  • check_circleVerloopplug
  • check_circleSMA-F to SMA-F
Antenne adapter SMA-F naar SMA-F

€ 3, 75

(0)
  • check_circleStanding Wave Analyzer
Standing Wave Analyzer 1.8-255 / 300-500 MHz

The CAA-500 is a very accurate, simple to use SWR and impedance analyzer to find antenna resonance and make quick antenna adjustments.
The analog cross-needle meter displays SWR and impedance simultaneously as you sweep the chosen frequency range, instantly providing the information needed.

The NEW COMET CAA-500MarkII retains the cross-needle analog display and adds a full-color TFT LCD screen providing graphic and numerical SWR values along with total impedance with R and X values.

FEATURES:
  • Auto band-sweep function: Switch to the amateur band of choice and press the "Sweep Center" button. The chosen band is swept and SWR graphed in seconds
  • Manual band sweep function: Select the band, select the center frequency, and select the bandwidth to manually sweep the chosen range
  • Multiple manual sweeps: You can overlay manual sweep results in 5 different selectable colors!
  • Make antenna length, position, height above ground, gamma match adjustments etc., and graph each adjustment in seconds in a new color without losing the previous graph!
  • 8-16VDC external power or 6 AA Alkaline batteries (up to 10 hours of operation) or Nickel-Metal Hydride (NiMH)
  • Trickle charger built in (only for NiMH batteries)
  • Battery indicator light
  • Selectable auto-power off time limit
  • SO-239 connector for 1.8-300MHz range
  • N-male connector for 300-500MHz range
  • Operating Range 1.8 - 500 MHz in 35 ranges
  • Impedance Range 12.5 - 300 ohms
  • VSWR Range 1:1 to infinity
  • Oscillator Output 113 dBµ/50 ohm
  • Display Type1.8 inch TFT Color LCD
  • External Power 8-16 VDC 185 mA
  • Size 80x170x60 mm
  • Weight 800 g

Handleiding

€ 469, 95

(0)
  • check_circleSWR / Powermeter
  • check_circleVHF/UHF
CMX-400 meter tot 200 watts power meter op VHF/UHF 140~525Mhz.
Groot duidelijk cross needle display FWD/REF en SWR simulaties, met minimaal power loss CMX-400 door het gebruik van een low loss sensor.
De meter is mooi verlicht in rood en groen.

Gegevens:
  • VHF/UHF SWR/Power meter
  • Frequentie range 140~525Mhz
  • Power Handling - up to 200 Watts
  • Power Ranges 30/60/200 Watts
  • Impedantie 50 Ohms
  • VSWR 1.2 of beter
  • Insertion Loss 0.2dB of beter
  • Min Power voor SWR meting ca. 6 watts
  • Connector SO-239 type (PL)
  • Spanning voor verlichting 11~15 Volts
  • Afmeting 120 x 80 x 105 mm
  • Gewicht 630 gram

€ 109, 95

(1)
  • check_circleSWR en power
  • check_circleDigitaal
The K-PO DG-503 is a High Quality digital SWR & Watt meter for accurate measuring for Forward Power & Reflected Power & VSWR.
Frequency range from 1.6 to 60 MHz (VHF) and from 125 to 525 MHz (UHF) and a power range from 0 to 200 Watt.
The K-PO DG-503 has 1 x UHF-female input connector and 1 x UHF-female connector for the VHF band (1.6 to 60 MHz) and 1 x N-female input connector and 1 x N-female connector for the UHF band (125 - 525 MHz). The K-PO DG-503 voltage is 12 Volt.

Features:
  • Large LCD (3.5") display for easy of reading
  • Forward / Reflected power / VSWR ratio in one push button
  • LCD backlight display
  • Convenient control layout for easy operation
  • DC 12 Volt
Technical specifications:
  • Frequency Range: 1.6 - 60 MHz & 125 - 525 MHz
  • Caibration point: 14MHz - 50MHz - 145MHz - 435MHz
  • Impedance 50 Ohm
  • Power Range: 0 - 200W
  • Accuracy: (+/- 5%)
  • Minimum Power for SWR: 1W
  • Insertion Loss Less than 0.1 dB
  • Testing function: Fwd/Ref Power & VSWR ratio
  • Voltage: 12 Volt
  • Input Connector: 1 x N-female + 1 x UHF-female
  • Output Connector: 1 x N-female + 1 x UHF-female
  • Dimension (W/H/D) mm 140 x 84 x 122
  • Weight (Net): 750 Gram
Package:
  • 1 x K-PO DG503 SWR/Watt meter
  • 1 x 12 Volt DC kabel
  • 1 x User manual (English)

€ 129, 00